(Please See Also Update 12/17/06 .)  Return of the Shish The reassembled shish kebab is put back into the pontoon. Shawn writes: You basically just slide it back into place and get the bottom rod(s) inserted into the motors. You need to be sure the kebabs are both at an equal position relative to each other. Using one of the cross bars on the seat rail is a good guide. If they don't match up you pull one kebab all the way out and spin it on the 'skewer' to make it line up with the other side. A little trial and error is needed here to get it right. After they are lined up first install the larger torx bolt to hold the skewers in place THEN put the two smaller torx bolts in place which locks the pontoons. If you do it backwards most likely you won't be able to install the larger torx bolt as the pontoon will block the hole.

10 Seat Rocking Shish Kebab Seat Rocking Fix: Part 1 Behold the Kebab~~ Part 2 Remove the Seat~~ Part 3 Remove Seat Belt~~ Part 4 Check the Wires~~ Part 5 Free the Shish~~ Part 6 Shish KeBaba~~ Part 7 Disassembled Shish Kebab~~ Part 8 Sanding the Bushings~~ - - - - Part 10 Return of the Shish~~ Part 11 Rebuild the Pontoon~~ Part 11 Rail Motor Video ~~ Part 12 Drop Seat in Car ~~ Part 12 Drop Seat Video- Why this is harder in a Coupł ~~ Part 13 Reconnect Heat and Power~~ Part 14 Replace Belt & Seat~~ - - - - - - - - - - - - - - - - - While the Seat is out: Part 9 Remove the Door Sills~~ Part 9 Remove the Hump~~ Part 9 What's under the Floor~~ - - - - - - - - More Fun Toys: Part 15 Ron Stygar Clutch Stop~~ Part 16 Doug Whalen Shift Knobs~~ Part 17 Fancy Cam Covers~~ Part 18 Beige Dot Leather Sport Seats~~ Part 19 The *only* Beige Dot Leather Console Lid~~

Z3ers.com~Esmerelda's Home Page